Technical Types Of Grinding And Polishing Products

There are many types of grinding and polishing products on the market. From the technical principle, we mainly divide them into three types:

 

1. The first type of physical grinding. The abrasive particles are in the shape of an irregular diamond, with different thickness levels. The effect of deoxidizing scratches is quite good. The mainstream grinding and polishing technology in the market; while coarse abrasives with edges and corners often cause secondary fine scratches, requires a finer first-grade abrasive and more than two times of grinding, the procedure is complicated, and it will inevitably damage the paint surface. Frequent use of this grinding product technology makes the paint surface rely on polishing and waxing like taking drugs. The varnish layer has become thinner and thinner, and the brightness of the original car paint has been eclipsed.

 

 

2. The second type of physics + overlay grinding; the rough scratches disappear just after polishing, and there is a bright effect, but there are obvious fine scratches in the sun, the reason: some scratches are filled by wax or resin oily components, not real Removal; if the oil is too large, the texture of the polished hairball will produce optical rotation. This kind of polishing method is very easy to reproduce the scratches after washing the car two or three times, which is highly deceptive.

 

 

3. The third top-level and rare grinding technology: is time-delay broken polishing technology, the abrasive is in the shape of glass beads, which will not cause secondary grinding scratches, and the temperature of the paint surface is low; when the polishing hairball is running at high speed and abrasive When a certain temperature is generated, the abrasive particles are instantly broken to form finer particles, which can effectively polish the fine and deep layers, one step in place, the more polished the brighter, this polishing technology not only guarantees the effect but also eliminates the damage to the paint surface by polishing to the greatest extent ( Polishing must hurt)! At the same time, this kind of abrasive does not contain wax or resinous oily ingredients, throwing a glossy paint surface with a deep original lacquer luster, and the cold light texture is amazing.

 

 

How to choose high-quality paint grinding products, we have two suggestions:

 

 

1. To ensure the complete removal of scratches and oxide layers, minimize damage to the paint surface. For example, depending on the specific conditions of the paint surface, a reasonable choice of particle-size abrasives should be used, and sandpaper should be used locally as much as possible.

 

 

2. Don't just pursue the surface effect after construction, and put an end to the use of oily covering functions such as wax or resin.